Glaze n seal paver sealer

An easy to use water base acrylic designed to seal and lock in joint sand in one step. Provides long lasting protection against stains, oil and grease. Beautifies and protects from color fading. This unique formula makes the surface easier to clean and maintain.

Seals, locks-in sand joints and enhances porous concrete, pavers, brick, natural stone like slate and flagstone. Other uses include block and masonry walls, decorative concrete, and more. Excellent resistance to stains, oil, efflorescence, weeds and UV fading. Deep color enhancement that is easy to apply and maintain. Remove all dirt, oil, grease, paint, efflorescence and non-compatible sealers. When acid has been used for any reason, surface must be neutralized.

Glaze n seal paver sealer

Select a Size Volume. Wet Look Paver Sealer is the ideal one-step, easy to apply, product for sealing interlocking concrete pavers and stabilizing joint sand by locking it into place. This state of the art formula offers exceptional, high gloss wet look protection with stain resistance even against oil and grease , resists color fading, efflorescence, weeds and mildew growth on the surface. Use garden-type, solvent resistant sprayer, low pressure airless sprayer, or natural bristle brush and non-foam squeegee for application. Rollers are not recommended when applying the Wet Look Paver Sealer. Apply one coat in liberal, saturating manner so that joints are saturated with Paver Sealer. Ensure that all joints are flooded to maximize sealer soaking into the dry sand. Squeegee any excess product to avoid puddling on the surface. Allow additional drying time in moist, cool climates. An optional second coat may be applied after two hours if desired to increase protection and gloss. Product Details. General Wet Look Paver Sealer is the ideal one-step, easy to apply, product for sealing interlocking concrete pavers and stabilizing joint sand by locking it into place. Product Application Use garden-type, solvent resistant sprayer, low pressure airless sprayer, or natural bristle brush and non-foam squeegee for application. Technical Specs.

This unique formula, makes it easy to clean, maintain and even reapply the sealer to refresh the surface as needed. Allow additional drying time in moist, cool climates.

.

Seals, locks-in sand joints and enhances porous concrete, pavers, brick, natural stone like slate and flagstone. Other uses include block and masonry walls, decorative concrete, and more. Excellent resistance to stains, oil, efflorescence, weeds and UV fading. Deep color enhancement that is easy to apply and maintain. Remove all dirt, oil, grease, paint, efflorescence and non-compatible sealers. When acid has been used for any reason, surface must be neutralized. Read product container for specific instructions and cautions with any cleaner. Never mix cleaners. Allow at least 24 hours of drying time before sealing 48 hours if power washing has been done or if temperature is cool. Applying sealer to a damp or incompletely cured surface may cause a hazy appearance or loss of adhesion.

Glaze n seal paver sealer

An easy to use water base acrylic designed to seal and lock in joint sand in one step. Provides long lasting protection against stains, oil and grease. Beautifies and protects from color fading. This unique formula makes the surface easier to clean and maintain. Surface can be recoated with a maintenance coat as needed. It is LEED eligible.

Sportspower trampoline net

Beautifies and protects from color fading. Wipe down application method will result in a matte finish with the same reliable protection. Continue rinsing. Allow additional drying time in moist, cool climates. Wet Look Paver Sealer is the ideal one-step, easy to apply, product for sealing interlocking concrete pavers and stabilizing joint sand by locking it into place. Do not apply this sealer to areas where sealer will be immersed such as fountains, pools or below grade areas. General Wet Look Paver Sealer is the ideal one-step, easy to apply, product for sealing interlocking concrete pavers and stabilizing joint sand by locking it into place. The sand should be dry to its full depth before sealing for best results. An easy to use water base acrylic designed to seal and lock in joint sand in one step. Coverage: to square feet per gallon depending on porosity of surface and method of application. Read product container for specific instructions and cautions with any cleaner. This unique formula makes the surface easier to clean and maintain. Do not apply this sealer to areas where sealer will be immersed such as fountains, pools or below grade areas. Product Details. Search for:.

.

Sizes Available Gallon, 5 Gallon. This unique formula, makes it easy to clean, maintain and even reapply the sealer to refresh the surface as needed. Air and surface temperature should be above 45oF for 24 hours before and after sealing. If a matte finish is preferred, wipe sealer off surface with a clean dry cloth within the first five to ten minutes after application before the sealer dries. Do not over apply or puddle. Wash thoroughly after handling. Other uses include block and masonry walls, decorative concrete, and more. Roll back or squeegee any excess product to avoid puddling on the surface. Do not apply this sealer to areas where sealer will be immersed such as fountains, pools or below grade areas. Causes serious eye irritation. Remove contact lenses, if present and easy to do.